Fronius Symo 8.2-3-M Service Manual & Spare Parts List

108
Replacing other
components
WARNING!
Follow the safety rules (see start of "Safety" chapter)
If the following components are faulty, the complete inverter must be replaced:
- Housing parts (except lid)
- Inductors
- Heat sink
- Seals (except the seal on the lids)
The lids (DATCOM lid and power module lid) can be replaced as an assembly with sprayed
seal.

Fronius Symo 8.2-3-M Specifications

General

AC nominal output	8.2 kW
Max. input voltage	1000 V
MPPT voltage range	200 - 800 V
Number of MPPT	2
Protection class	IP65
Frequency	50 / 60 Hz
THD	< 3%
Power factor (cos φac,r)	0.85 - 1 ind./cap.
Efficiency	98.1%
Operating Temperature Range	-25°C to +60°C
Max. apparent AC power	8200 VA
AC nominal voltage	3 x 230 / 400 V