EasyManua.ls Logo

Fronius Symo Advanced 10.0-3 208-240

Fronius Symo Advanced 10.0-3 208-240
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Warning Notices
Affixed to the De-
vice
There are warning notices and safety symbols on and in the inverter. These warning notic-
es and safety symbols must not be removed or painted over. They warn against incorrect
operation, as this may result in serious injury and damage.
Text of the Warning Notices:
WARNING!
Risk of electric shock!
Non-insulated inverter
Do not remove the cover. The device does not contain any user-serviceable parts. Main-
tenance work must be carried out by a trained service technician.
Both AC and DC voltage sources terminate inside this device. Each circuit must be turned
off before carrying out maintenance work.
Wenn das Solarmodul-Feld Licht ausgesetzt wird, liefert dieses eine Gleichspannung an
dieses Gerät.
Gefahr eines elektrischen Schlages durch in Kondensatoren gespeicherte Energie. Deckel
nicht entfernen, bevor nach Abschalten aller Versorgungsquellen 5 Minuten vergangen
sind.
Ungeerdetes System: Die DC Leitungen dieses Photovoltaiksystems sind nicht geerdet
und können stromführend sein.
Information on
Dummy Devices
A dummy device should not be connected to a photovoltaic system for real operation and
may only be used for demonstration purposes.
IMPORTANT! When using a dummy device, you should never connect a live DC cable to
the DC connection sockets.
You may connect live cables or cable pieces for demonstration purposes.
Dummy devices can be recognized by their device rating plate:
Safety Symbols:
Risk of serious injury and damage due to
incorrect operation
Do not use the functions described here
until you have fully read and understood
the following documents:
- These operating instructions
- all the operating instructions for the
system components of the photovol-
taic system, especially the safety
rules
Dangerous electrical voltage
Wait for the capacitors to discharge.

Table of Contents

Related product manuals