28
Navigation in the Menu Level
Activate the dis-
play illumination
Press any key.
The display illumination is activated.
The SETUP menu, under the ‘Display settings - illumination’ entry, offers a choice be-
tween a permanently lit or permanently dark display.
Automatic Deacti-
vation of Display
Illumination /
Switching to the
"NOW" Display
Mode
If no key is pressed for 2 minutes, the display illumination turns off automatically and the
inverter switches to the ‘NOW’ display mode (if the display illumination is set to AUTO).
The inverter can automatically be switched to the ‘NOW’ display mode from any menu lev-
el, unless the inverter was manually switched to standby mode.
The current power feed-in is displayed after automatically switching to the ’NOW’ menu
item.
Access the menu
level
The menu items
- NOW
shows current data
- LOG
shows data recorded from today, from the current calendar year and since the inverter
was started for the first time
- GRAPH
daily characteristic curve graphically represents the course of the output power during
the day. The time axis is automatically scaled. Press the ‘Back’ key to close the display
- SETUP
setup menu
- INFO
information on the device and software
1
Press the ‘Esc’ key
The display switches to the menu level.
Use the ‘left’ or ‘right’ key to select the
desired menu item
Access the desired menu item by pressing
the ‘Enter’ key
1
2
3
To Next Page
Loading...
