31
EN-US
The SETUP menu item
Presetting After completing the entire start-up process (for example, using the Installation Wizard),
the inverter is preconfigured depending on the country setup.
The SETUP menu lets you easily customize the inverter’s preset parameters to your
needs.
Software Updates
NOTE!
Because of software updates, certain functions may be available for your device but
not described in these operating instructions or vice versa.
In addition, individual figures may also differ from the operating elements of your device.
However, the function of these operating elements is identical.
Navigation in the
SETUP Menu
Accessing the SETUP Menu
In the menu level, use the ‘left’ or ‘right’ keys
to select the ‘SETUP’ menu
Press the ‘Enter’ key
The first entry in the SETUP menu is displayed:
‘Standby'
Scrolling between Entries
Use the ‘up’ or ‘down’ keys to scroll
between the available entries
Exiting an Entry
To exit an entry, press the "Back" key
The menu level is displayed
GRAPH
1
2
Standby
WiFi Access Point
DATCOM
USB
Relay
3
GRAPH
4
To Next Page
Loading...
