33
EN-US
The overview of adjustable values is displayed.
Use the ‘up’ or ‘down’ keys to select
the ‘Feed-in tariff’
Press the ‘Enter’ key
The feed-in tariff is displayed
The tens digits flashes.
Use the ‘plus’ or ‘minus’ keys to select
a value for the tens digit
Press the ‘Enter’ key
The units position flashes.
Repeat steps 5 and 6 for the units position
and the 3 decimal places until ...
The set feed-in tariff flashes.
Press the ‘Enter’ key
The feed-in tariff is applied and the overview of
adjustable values is displayed.
Press the ‘Esc’
The ‘Energy yield’ setup menu entry is displayed.
3
4
5
6
7
8
9
To Next Page
Loading...
