Contents
Safety rules 5
Explanation of safety notices 5
General 5
Proper use 6
Environmental conditions 6
Obligations of the operator 6
Obligations of personnel 6
Mains connection 7
Residual current protective device 7
Protecting yourself and others 7
Noise emission values 8
Danger from toxic gases and vapours 8
Danger from flying sparks 9
Risks from mains current and welding current 9
Meandering welding currents 10
EMC Device Classifications 10
EMC measures 11
EMF measures 11
Specific hazards 11
Requirement for the shielding gas 12
Danger from shielding gas cylinders 13
Safety measures at the installation location and during transport 13
Safety measures in normal operation 14
Commissioning, maintenance and repair 14
Safety inspection 15
Disposal 15
Safety symbols 15
Data protection 15
Copyright 16
General 17
Device concept 17
Warning notices on the device 17
Application areas 18
Before commissioning 20
Safety 20
Proper use 20
Setup regulations 20
Generator-powered operation 21
Controls, connections and mechanical components 22
Safety 22
TransPocket 150 controls, connections and mechanical components 23
TransPocket 180 controls, connections and mechanical components 24
Control panel 25
MMA welding 27
Preparation 27
MMA welding 28
SoftStart / HotStart function 28
Arc-force dynamic 29
Pulse welding 30
TIG modes 32
Symbols and their explanations 32
2-step mode 32
4-step mode 33
TIG welding 34
General 34
Connecting the gas cylinder 34
Preparation 35
Setting the gas pressure 36
TIG welding 36
TIG Comfort Stop 37
3
EN
To Next Page
Loading...
