Fronius TransPocket 150 TIG - TIG Welding; General; Connecting the Gas Cylinder

TIG welding
General
NOTE!
Do not use pure tungsten electrodes (colour-coded green) if the TIG welding
process has been selected.
NOTE!
2-step and 4-step welding is only possible if a welding torch with a TIG Multi
Connector plug is used.
Connecting the
gas cylinder
WARNING!
Danger from falling gas cylinders.
This can result in severe personal injury and damage to property.
▶
Place gas cylinders on a solid, level surface so that they remain stable. Se-
cure gas cylinders to prevent them from falling over.
▶
Observe the safety rules of the gas cylinder manufacturer.
1
max. 5 bar
(72 psi)
2
34