Commissioning
Safety
WARNING!
An electric shock can be fatal.
If the power source is connected to the grid during installation, there is a danger of seri-
ous personal injury and property damage.
▶
Only carry out work on the device when the power source's power switch is in the -
O - position.
▶
Only carry out work on the device when the power source has been disconnected
from the grid.
WARNING!
Danger of electrical current due to electrically conductive dust in the device.
This can result in severe personal injury and damage to property.
▶
Only operate the device if an air filter is fitted. The air filter is a very important safety
device for achieving IP 23 protection.
General Commissioning is described with reference to a manual, water-cooled MIG/MAG applica-
tion.
Information on
system compon-
ents
The steps and activities described below include references to various system compon-
ents, such as
- Trolley
- Upright bracket
- Cooling units
- Welding torches, etc.
For more detailed information about installing and connecting the system components,
please refer to the appropriate Operating Instructions for the system components.
48
To Next Page
Loading...
Need help?
General
