32
Inserting/replacing feed rollers
General remarks In order to achieve optimum wire electrode feed, the feed rollers must be suitable for the
diameter and alloy of the wire being welded.
IMPORTANT! Only use feed rollers that match the wire electrode.
An overview of the feed rollers available and their possible areas of use can be found in
the spare parts lists.
USA wirefeeders In the USA, all wirefeeders are delivered without feed rollers. After inserting the wirespool,
the feed rollers must be inserted into the wirefeeder.
inserting/replac-
ing feed rollers
1 2
3
4
4
5
2
1
6
6
1
4
5
3
2
1
2
1
2
3
1
2
3
To Next Page
Loading...
