Fronius VR 7000 - Feeding in the Wire Electrode; Wire Electrode Feeding Process

35
EN
Feeding in the wire electrode
Feed in the wire
electrode
CAUTION!
Risk of injury from springiness of spooled wire electrode.
When inserting the wire electrode into the 4 roller drive, hold the end of the wire electrode
firmly to avoid injuries caused by the wire springing back.
CAUTION!
Risk of damage to the welding torch from sharp end of wire electrode.
Deburr the end of the wire electrode well before feeding in.
1 2
3 4
CAUTION!
Risk of injury from wire electrode emerging at speed.
When pressing the wire threading button or the torch trigger, keep the welding torch away
from your face and body, and wear suitable protective goggles.
4
4
1
2
1
1
2
2
2
2
3
3
1
3 4