PULL
-------
LOV™ Fryer Station Guide
Quality
□ What are the customer expectations for
fried products?
Fresh and full of flavor
Served hot
Gold Standard Quality Descriptions
McNuggets, Crispy, etc.
□
Turn the power switch ON
Press the right ON/OFF key
for full pot or press ON/OFF
key on desired side for split
pot-30 minute heat up.
□ Check product cooking DISPLAY
Display shows dashed lines.
Or verify menu item shown in
display is for fried product cooked
in this pot.
□ Change from Multi Product to Dedi-
cated
1. Press product key for desired
product.
2. Press and hold the cook chan-
nel button under the display
for 3 seconds.
3. Beep will be heard.
4. Display will show product
name of selected product.
□ Change from Dedicated to
Multi Product Mode
1. Press and hold the cook chan-
nel button under the display
menu item for approximately
three seconds until beep is
heard.
2. Display changes to dashed
lines.
□ Cooking fried products
(Multi Product Display)
1. Dashed lines appear in prod-
uct displays.
2. Press a product button.
3. Press a cook channel button
and place basket of product
in fry pot.
4. Display alternates be-
tween product name
and remaining cook
time.
5. Duty alarm sounds if product
needs duty alarm.
6. Press cook channel button to
cancel duty alarm.
7. Finish alarm sounds and
PULL is displayed when the
cook cycle finished.
8. Pull product from vat.
9. Press cook channel button to
cancel alarm.
10. Dashed lines appear in
product displays.
-------
-------
duty
-------
MCCK
MCCK 2:34