Fuji Electric FRENIC-Lift FRN0032LM2A-4 User Manual

8-2
8.2 Compliance with European Standards
The CE marking on Fuji products indicates that they comply with the essential requirements of the
Electromagnetic Compatibility (EMC) Directive, Low Voltage Directive, Machinery Directive and Lift Directive
which are issued by the Council of the European Communities.
The amount of current leaked by internal EMC-compatible filter is significantly large, and therefore a
check should be performed to determine whether the power supply system is affected.
! Refer to Chapter 8.4.3 below for details on EMC filter leakage current values.
The products comply with the following standards
Table 8.1 Product Standards Compliance
FRN0011LM2A-7□,
FRN0018LM2A-7□
FRN0006LM2A-4□ to
FRN0025LM2A-4□
FRN0032LM2A-4□ to
FRN0091LM2A-4□
Low Voltage
Directive
IEC/EN 61800-5-1
EMC Directives
IEC/EN 61800-3
Immunity : Second environment
(Industrial)
Emission: Category C2
IEC/EN 61800-3
Immunity :
Second environment
(Industrial)
Emission: Category C3
IEC/EN 61326-3-1
Machinery
Directive
EN ISO 13849-1 :Cat. 3 / PL=e
IEC/EN 61508-1 to -7 :SIL3
IEC/EN 61800-5-2 :SIL3 , Safety function: Safe Torque Off (STO)
IEC/EN 62061 :SILCL3
Lift Directive
EN 81-1(in extract), EN 81-2(in extract)
EN 81-20(in extract)
EN 12015,EN 12016
Note
A box (
"
) replaces an alphabetic letter depending on the shipping destination.
"Shipping destination: E (Europe) or A (Asia)
8.3 Conformity to the Low Voltage Directive in the EU
To use Fuji inverters as a product conforming to the Low Voltage Directive in the EU, refer to guidelines given
on pages vii to viii.

Fuji Electric FRENIC-Lift FRN0032LM2A-4 Specifications

General

Brand	Fuji Electric
Model	FRENIC-Lift FRN0032LM2A-4
Category	Inverter
Language	English