Fuji Electric Frenic-Mini - Page 5

5
Conformity to UL standards and Canadian standards (cUL certification) (Continued)
5. Install UL certified fuses rated 600Vac between the power supply and the inverter, referring to
the table below.
*1 Denotes the relay contact terminals for [30A], [30B] and [30C].
*2 Denotes control terminals except for [30A], [30B] and [30C].
*3 Values in [ ] mean the size(AWG) of Grounding wire if exist.
6. To comply with CSA for AC200V input models, transient surge suppression shall be installed
on the line side of this equipment and shall be rated 240V (phase to ground), 240V (phase to
phase), suitable for overvoltage category 3, and shall provide protection for a rated impulse
withstand voltage peak of 4kV.
To comply with CSA for AC400V input models, transient surge suppression shall be installed
on the line side of this equipment and shall be rated 278V (phase to ground), 480V (phase to
phase), suitable for overvoltage category 3, and shall provide protection for a rated impulse
withstand voltage peak of 4kV.
7. Maximum surrounding air temperature rating of 50 ºC.
Required torque
Ib-in (N
m)
Wire size
AWG or kcmil
(mm
2
)
Control circuit Control circuit
Power
supply
voltage
Inverter type
Main
terminal
*1
TERM1
*2
TERM2-1
TERM2-2
*3
Main
terminal
*1
TERM1
*2
TERM2-1
TERM2-2
Class J fuse current(A)
FRN0001C2S-2U 3
FRN0002C2S-2U 6
FRN0004C2S-2U 10
FRN0006C2S-2U
10.6
(1.2)
15
FRN0010C2S-2U
14
20
FRN0012C2S-2U
14[12]
30
Three-phase
200V
FRN0020C2S-2U
15.9
(1.8)
3.5
(0.4)
1.7
(0.2)
10[10]
20
(0.5)
40
FRN0002C2S-4U 3
FRN0004C2S-4U 6
FRN0005C2S-4U 10
FRN0007C2S-4U
14
15
Three-phase
400V
FRN0011C2S-4U
15.9
(1.8)
3.5
(0.4)
1.7
(0.2)
14[12]
20
(0.5)
20
FRN0001C2S-7U 6
FRN0002C2S-7U 6
FRN0004C2S-7U 10
FRN0006C2S-7U
10.6
(1.2)
14
15
FRN0010C2S-7U
14[12]
30
Single-phase
200V
FRN0012C2S-7U
15.9
(1.8)
3.5
(0.4)
1.7
(0.2)
10[10]
20
(0.5)
40