Fuji Electric NA0AX06-PT - Resistance Thermometer Element Input Unit (Type: NA0 AX06-PT)

2-25
Section 2 Specications
2-3-7 Resistance thermometer element input unit (Type: NA0AX06-PT)
(1) Names
2) Terminal block
1) Status indication LED
Nameplate
Expansion connector (IN)
Expansion connector (OUT)
2) Terminal block
Status indication LED Status Specication
PWR of resistance thermometer element input unit ON (red) While 5V DC power is normally supplied.
(2) Functions
1) Status indication LED
2) Terminal block
These are terminals for 24V DC power supply to operate the unit and sensor input.
* For the wiring method, see “2-4 Wiring.”