Fuji Electric NA0AX06-PT - Page 50

3-8
Section 3 Programming
(3) Resistance thermometer element input unit (Target type: NA0AX06-PT)
For a resistance thermometer element input unit, set the sensor type of the resistance thermometer element, moving average
execution times, sampling period, and unit.
Parameter Setting range
Sensor type
PT100-DIN:
PT100-JIS:
PT1000-DIN:
PT1000-JIS:
Moving average No moving average, 2, 4, or 8 times
Sampling period High speed (1 second) or low speed (2 seconds)
Unit Celsius or Fahrenheit
<How to set parameters>
1) Right-click the thermocouple input unit registered in the system denition screen and left-click [Properties]. The “Module
properties” dialog box opens.
2) Click the [Parameter] button to display the “Temperature Measurement Unit parameter setting” dialog box.
Set the sensor type, moving average, sampling period, and unit for all channels in a batch, and then click the [OK] button.