3 Copy
118
Copy
3
Image Quality
The section describes the features you can select on the [Image Quality] screen.
Original Type (Selecting the Document Type)...................................................................................................................... 118
Image Options (Adjusting Copy Density/Sharpness/Saturation of Images)................................................................ 120
Image Enhancement (Erasing the Background Color of Documents/Adjusting Contrast).......................................120
Color Effects (Selecting an Image Quality)........................................................................................................................... 121
Color Balance (Adjusting Color Balance)...............................................................................................................................122
Color Shift (Adjusting the Color Tone).................................................................................................................................... 123
Gloss Level (Enhancing Gloss of the Document)..................................................................................................................124
1
Select [Copy] on the Services Home screen.
2
Select a feature on the [Image Quality] screen.
Note • If the color reproduction is unsatisfactory, perform calibration. For information on calibration, refer
to "3 Maintenance" > "Executing Calibration" in the Administrator Guide.
Original Type (Selecting the Document Type)
This feature allows you to select the type of documents, such as text and photos. By
selecting a document type, you can make copies at optimum image quality.
1
Select [Original Type].
2
Select any option.
Auto
Automatically sets the document type based on the setting made in the System
Administration mode and the setting made in [Output Color] on the [Copy] screen.
To Next Page
Loading...
Need help?
General
