Fuji Xerox ApeosPort-V C5580

5 Scan
358
Scan
5
 Enter Output Size
In [Output Size], select the output size of the
scanned document. The machine automatically
calculates the scanning ratio based on the
selected output size and the original document
size.
Note • Selecting [Enter Output Size] may generate
blank margin areas.
Original Orientation (Specifying the Orientation of the Loaded Documents)
Set the orientation of the loaded document to specify the top edge of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.

Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.

Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.