4 Fax
222
Fax
4
Note • To delete the input data and return to the [Fax Address Book] screen, select [Cancel].
The items displayed on the screen depend on the Address Book entry type. For more information on the setting items, refer
to "5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
10
When the settings are completed, select [Registered].
Note • To return to the previous screen, press the [Back] button.
Specifying a Destination Using the One Touch Button
You can use the one touch buttons to specify recipients.
One touch buttons correspond to the address numbers from 0001 to 0070, or 0001 to 0060.
For example, when the number you want to dial is registered to the address number 0001,
press one touch button <1>.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the
Administrator Guide.
Note • There are two ways in which address numbers and stored programs are assigned to the one touch
buttons. Select either of the following. By default, [Type 1] is selected.
-[Type 1]
The buttons 1 to 70 are used for address numbers and they correspond to the registered address
numbers 0001 to 0070, while the buttons M01 and M02 are used for stored programs and they
correspond to the registered stored programs 1 and 2.
-[Type 2]
The buttons 1 to 60 are used for address numbers and they correspond to the registered address
numbers 0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for stored programs
and they correspond to the registered stored programs 1 to 12.
• The Large Size UI Kit (optional) does not support the one touch buttons.
1
Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch screen.
Important • The one touch buttons have a sensor to detect which page of one touch buttons (1 - 24, 25 - 48, or
49 - M02) is currently opened. Before pressing a one touch button, turn over the one touch panel
completely, and take off your hand from the panel. Do not press the button while you are turning
over the panel.
• Do not place any objects near the one touch buttons, nor spill any liquid over them.
Name
Remote Folder
Index
F Code
Extension / Outside Line
Relay Broadcast
Relay Station Setup
Billing - Day Time, Billing - Night Time, Billing - Midnight
Starting Rate
Internet Fax Profile
Resolution
S/MIME Certificate (ApeosPort Series Models Only)