4 Fax
250
Fax
4
Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For
information on the Folder Report setting, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in the
Administrator Guide.
For information on how to print files received in a folder, refer to "Printing Files in a Folder" (P.377).
Sending to Folder (F Code Method)
1
Select [F Code].
2
Select [On].
3
Select the [F Code] box, and enter an F code using the displayed keyboard or the numeric
keypad.
Note • You can enter up to 20 digits for the F code.
4
If necessary, select the [Password] box, and enter a password using the displayed keyboard
or the numeric keypad.
Note • You can enter up to 20 digits for the password.
Off
The F code transmission is not used.
On
The F code transmission is used. Enter the F Code.
F Code
Select the [F Code] box, and enter the F code using the displayed keyboard or the numeric
keypad.
Note • You can enter up to 20 digits for the F Code.
Password
Select the [Password] box, and enter the password using the displayed keyboard or the
numeric keypad. If a password is not set, leave this box blank.
Note • You can enter up to 20 digits for the password.
Keyboard
Enter the F code or the password using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.89).
5
Specify a destination, and then press the <Start> button.
To Next Page
Loading...
Need help?
General
