Fuji Xerox Color C60

6. Click Apply.
Disable the USB Card Reader
Use the following instructions to disable the USB Card Reader for any of the following
circumstances:
• The USB Card Reader is being replaced with the traditional Type A USB card reading
device.
• Xerox
®
Secure Access is no longer used for authentication on the device.
Note
The USB Card Reader and Traditional Type A USB Card Reader should not be used
simultaneously.
Deactivating Equitrac Provider and Libraries for USB Card Readers
To deactivate USB card services:
1. In CentreWare Internet Services, click Properties > Security > Plug-in/Custom
Services Settings > List of Embedded Plug-ins.
2. Select Equitrac XCP Provider.
3. Click Stop.
4. Click OK when the “Do you want to deactivate the selected plug-in” message appears.
5. Select Libraries for Equitrac XCP Provider.
6. Click Stop.
7. Reboot the machine to deactivate the current plug-in:
a. Click the Status tab.
b. Click Reboot Machine.
c. Click OK when the Do you want to reboot? message displays.
Disabling Plug-in Features
To disable plug-in features:
1. In CentreWare Internet Services, click Properties > Security > Plug-in/Custom
Services Settings > Embedded Plug-ins.
2. Deselect the Enabled checkbox.
3. Click Apply.
4. Reboot the machine to deactivate the current plug-in:
a. Click the Status tab.
b. Click Reboot Machine.
c. Click OK when the Do you want to reboot? message displays.
Xerox
®
Color C60/C70 Printer14-6
System Administrator Guide
Secure Access