Fuji Xerox Color C60 System Administrator Guide

• Select your local time zone.
• Configure certification, system access level, SMTP, and LDAP.
Configuration Report
After you complete the installation wizard, you can obtain a Configuration Report. The
Configuration Report lists the printer's current settings. By default, a Configuration
Report prints at startup.
Printing the Configuration Report
To print a configuration report:
1. At the printer Control Panel, press the Machine Status button and touch the Machine
Information tab.
2. Touch Print Reports.
3. Touch Printer Reports.
4. Touch Configuration Report and press the Start button.
System Administrator Access at the
Control Panel
To configure the printer from the Control Panel, press the Machine Status button, then
touch the Tools tab. If the printer is locked, log in as the System Administrator.
To log in as a System Administrator:
1. At the printer Control Panel, press the Log In/Out button.
2. Type admin and touch Next.
3. Type the Administrator passcode and touch Enter. The default password is 1111.
Locking or Unlocking the Printer
To lock or unlock the printer:
1. Log in as a System Administrator.
2. At the printer Control Panel, press Machine Status and touch the Tools tab.
3. Touch Authentication / Security Settings > System Administrator Settings >
System Administrators Login ID.
4. Touch On to lock the printer or Off to unlock.
If you touched On, touch Keyboard and enter the new System Administrator’s Login
ID. Touch Save. Touch Keyboard, re-enter the ID, and Save.
Xerox
®
Color C60/C70 Printer2-2
System Administrator Guide
Initial Setup

Fuji Xerox Color C60 Specifications

General

Brand	Fuji Xerox
Model	Color C60
Category	All in One Printer
Language	English