Click Configure to enable or disable services.
Enrolling and Setting up Communication
To enable SMart eSolutions/Xerox
®
Remote Print Services and set up communications:
1. In CentreWare Internet Services, access Properties > General Setup > SMart
eSolutions Setup > Communication Status.
2. Click Configure on the Communication Status page. The SMart eSolutions Setup
page opens.
3. In the Enrollment section of the SMart eSolutions Setup page, click the Enabled
check box next to SMart eSolutions Enablement.
4. In the Communication Setup section, indicate the time of day during which you
would like communication transmissions between the printer and the communication
server to occur.
Xerox
®
Color C60/C70 Printer17-6
System Administrator Guide
Xerox® Remote Print Services
To Next Page
Loading...
