Fuji Xerox Color C60

Internet Fax
Internet Fax allows you to scan a document at the printer and send it to a destination
using an email address or to receive and print an email with attachments. You can also
print a transmission report. Internet Fax enables this functionality without the use of a
telephone line.
Configuring Internet Fax Settings
Before you begin:
• Create an email address for the printer if you want it to receive Internet faxes.
• Configure POP3 settings.
• Configure SMTP settings.
• Install the Fax Hardware Kit.
Note
A domain name must be entered before you can enable Internet Fax.
Note
The Internet Fax service uses many of the same settings as the Email scanning service.
To configure E-mail / Internet Fax settings:
1. At the printer control panel, press the Machine Status button, then touch the Tools
tab.
2. Touch System Settings > E-mail / Internet Fax Service Settings > Email Control.
Configure Internet Fax Control Settings
1. At the printer Control Panel, press the Machine Status button, then touch the Tools
tab.
2. Touch System Settings > Fax Service Settings > Internet Fax Control.
3. Change the following fax settings as necessary:
• Internet Fax Path: Select Via E-mail Server to send to an email address using
an SMTP server. Select Direct (P2P) to send to an email address using a fully
qualified host name or IP address in one of the following formats:
Hostname: example.address@device.domain.jp
IP Address: example.address@[129.249.123.1]
• Profile for Broadcast Job: Select the profiles to use when sending an Internet
Fax broadcast:
11-9 Xerox
®
Color C60/C70 Printer
System Administrator Guide
Faxing