Fuji Xerox DocuCentre-IV C3373 Administration Guide

Specifications
621
Appendix
16
*1 : Based on when larger size paper is stacked on paper.
*2 : For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job with center binding/folding
specified was output, remove the output paper from the tray to output the next job. In addition, when you print a job with
cente
*3 : For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-B1 is required.
 Finisher-C1 (optional)
Booklet Finishing*2 Capacity : 15 sheets (center binding), 5 sheets (folding)
Paper Size : Maximum: A3, 11 x 17",
Minimum: A4, 8.5 x 11"
Paper Weight : 64 - 80 gsm (center binding),
64 - 105 gsm (folding)
Important • When using 80 gsm paper
Dimensions/Weight Width 620 x Depth 552 x Height 987 mm, 28 kg
Width 620 x Depth 597 x Height 1,057 mm, 37 kg (When the Booklet
Maker Unit is attached)
Space Requirement (when
connected to the main
unit)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1, when the
extension tray and the bypass tray are fully extended)
Width 1,666 x Depth 699 mm (Main unit + Finisher-B1 + Booklet Maker
Unit, when the extension tray and the bypass tray are fully extended)
Type Output tray x 1 : Sorting/Stacking
Finisher tray x 1 : Sorting (Offset available)/
Stacking (Offset available)
Paper Size/Paper Weight Output tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Finisher tray
Maximum: 12.6 x 17.7", 12 x 19",
Minimum: B5, 55 - 220 gsm
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4 : 3,000 sheets
B4 or larger : 1,500 sheets
Mixed stack* : 300 sheets
Finisher tray (For paper stapled)
A4 : 200 sets or 3,000 sheets
B4 or larger : 100 sets or 1,500 sheets
* : *Based on when larger size paper is stacked on paper.
Important • When using 80 gsm paper
Staple Capacity : 50 sheets (90 gsm or less)
Paper Size : Maximum: A3, 11 x 17", Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
Paper size : A3, 11 x 17", B4, A4, A4 , 8.5 x 11", 8.5 x 11" , B5
Number of Holes : 2/4 holes (Option: US 2/3 holes)
Paper Weight : 55 - 220 gsm
Important • When using 80 gsm paper
Dimensions/Weight Width 817 x Depth 639 x Height 1,058mm, 60 kg
Space Requirement (when
connected to the main
unit)
Width 1,863 x Depth 699 mm (Main unit + Finisher-C1, when the
extension tray and the bypass tray are fully extended)

Fuji Xerox DocuCentre-IV C3373 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Memory	2 GB
Hard Disk Drive	160 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Size	A3, A4, A5, B4, B5
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac, Linux
Print Speed	Up to 33 ppm (color/black)