Fuji Xerox DocuCentre-V C5580 Administrator's Guide

1 Before Using the Machine
24
Before Using the Machine
1
4 Select [System Settings] > [Common Service
Settings] > [Power Saver Settings].
5 Select [Power Saver Timers], and then select
[Change Settings].
6 Using [ ] and [ ], set the time to elapse until the machine enters the Power Saver mode,
in 1 minute increments.
 From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the machine enters the Low Power mode.
Note • The default value for [From Last Operation to Low Power Mode] is [1] minutes. You cannot disable
the Low Power mode.
 From Last Operation to Sleep Mode
Set the time to elapse from the last operation until the machine enters the Sleep mode.
Note • The default value for [From Last Operation to Sleep Mode] is [15] minutes. To enable the machine to
enter the Low Power mode before the Sleep mode, you must set a longer period of time for [From
Last Operation to Sleep Mode] than for [From Last Operation to Low Power Mode].
7 Select [Save].
8 Select [Close] repeatedly until the [Tools] screen is displayed.
9 Select [Close].

Fuji Xerox DocuCentre-V C5580 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C5580
Category	All in One Printer
Language	English