Fuji Xerox DocuCentre-V C5580 Administrator's Guide

Installation When Using TCP/IP (LPD/Port 9100)
335
Printer Environment Settings
7
For information on how to set an IP address, refer to "Protocol Settings" (P.206).
4 Enable the Bonjour port, and the Discovery feature that automatically detects printers on
the IP network can be enabled.
Note • To print from a printer detected by Bonjour, the LPD port must be enabled in advance.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [Bonjour], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
5 Select [Close] repeatedly until the [Tools] screen is displayed.
6 Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message displayed on
the screen, follow the message and reboot the machine.
7 Print a configuration report to confirm that the LPD port is enabled and that TCP/IP is set
up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.108).
8 Configure other LPD or Port 9100 settings as necessary.
For information on how to set up the LPD port or Port 9100, refer to "CentreWare Internet Services Setting Items" (P.335).
Step 3 Configuration on the Computer
To print from the machine, you need to install a print driver on your computer.
For information on the supported operating systems, refer to "Supported Operating Systems" (P.331).
For information on the driver installation procedures, refer to the manual contained in the Media (Software/Product
Manual).
You can print via TCP/IP (LPD) from a Macintosh computer for Mac OS X 10.5/10.6, Mac OS X 10.7 Lion, OS X 10.8 Mountain
Lion, OS X 10.9 Mavericks, and OS X 10.10 Yosemite. For information on the installation procedures of the print driver for
Mac OS X, refer to the manual contained in the media provided with the driver.
For information on the installation procedures of Adobe PostScript 3 Kit (optional), refer to the manual contained in the
media provided with the Adobe PostScript 3 Kit (optional).
CentreWare Internet Services Setting Items
You can configure the following setting items using CentreWare Internet Services:
For details on the setting items, click [Help] at the upper right corner of the CentreWare Internet Services screen to see help.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.324).

Spool Destination for Jobs
([Properties] > [General Setup] > [Memory Settings] > [LPD])
Note • The spool destination can be configured when the LPD port is enabled.

Receiving buffer size for Port 9100
([Properties] > [General Setup] > [Memory Settings] > [Port 9100])

Port Settings

IP Mode

Fuji Xerox DocuCentre-V C5580 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C5580
Category	All in One Printer
Language	English