Fuji Xerox DocuCentre-V C5580 Administrator's Guide

Error Code
483
Problem Solving
15
012-299
[Cause] Finisher malfunction
[Remedy] The error occurs when the first paper in a setting that comes to a finisher tray is taken
out before completely coming out to the finisher tray. Make sure to take out the paper
after it completely comes out. Switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
012-319
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-326
[Cause] Finisher malfunction
[Remedy] Make sure that a paper folding unit is plugged in. Switch off the machine power, make
sure that the touch screen is blank, and then switch on the machine power. If the error
still is not resolved, contact our Customer Support Center.
012-334
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
012-407
[Cause] The Booklet Rear Stapler Cartridge needs to be replaced soon.
[Remedy] Order a new Booklet Rear Stapler Cartridge. But do not replace until you are instructed
to. Printing can continue.
012-500
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
016-210
016-211
016-212
016-213
016-214
016-215
016-216
016-217
016-218
016-219
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
016-229
016-230
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Error Code Cause and Remedy

Fuji Xerox DocuCentre-V C5580 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V C5580
Category	All in One Printer
Language	English