3 Maintenance
92
Maintenance
3
2 Move the lock lever, shown in the figure,
leftward to the position.
3 Securely hold the staple scrap container by its
R5 section, and take the container out of the
machine.
4 Put the old container into the plastic bag
supplied.
Important • Do not disassemble the container and return
it to our Customer Support Center.
5 Hold a new staple scrap container by its R5
section, and insert the container, bottom first,
into the machine.
Important • To prevent injury, do not put your fingers on
top of the container.
6 Push the R5 section of the container until the
lock lever moves to the position.
7 Close the right cover of the finisher.
Note • A message will be displayed and the machine will not operate if the right cover of the finisher is even
slightly open.
To Next Page
Loading...
Need help?
General
