Printing Basics 134
Loading Print Media in the Priority Sheet Inserter (PSI)
NOTE:
• To avoid paper jams, do not remove the PSI while printing is in progress.
• Use only laser print media. Do not use ink jet paper in this printer.
1 Open the front cover.
2 Slide the PSI forward, and then align the PSI to the marking on the MPF.
3 Adjust the paper width guides to their maximum width.
4 Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the
edges of the stack on a level surface.
To Next Page
Loading...
