199 Troubleshooting
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 200
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 201
• "Random Spots/Blurred Images" on page 202
• "The Entire Output Is Blank" on page 203
• "Streaks Appear on the Output" on page 204
• "Pitched Color Dots" on page 205
• "Vertical Blanks" on page 206
• "Mottle" on page 207
• "Ghosting" on page 208
• "Fog" on page 209
• "Bead-Carry-Out (BCO)" on page 210
• "Auger Mark" on page 211
• "Wrinkled/Stained Paper" on page 212
• "The Top Margin Is Incorrect" on page 213
• "Color Registration Is out of Alignment" on page 214
• "Protrudent/Bumpy Paper" on page 215
NOTE:
• In this section, some procedures use the Printer Setting Utility or SimpleMonitor. Some procedures that use
the Printer Setting Utility can also be performed using the operator panel.
See also:
• "Understanding the Printer Menus" on page 164
• "Printer Setting Utility (Windows Only)" on page 45
• "SimpleMonitor (Windows Only)" on page 46
To Next Page
Loading...
