Using the Operator Panel Menus 182
Setting the PowerSaver Time Option
You can set the power saver time for the printer. The printer switches to the Power Saver Mode after
the specified time.
1 Press the (Menu) button.
2 Select Admin Menu, and then press the button.
3 Select System Setup, and then press the button.
4 Select PowerSaver Time, and then press the button.
5 Select Mode 1or Mode 2, and then press the button.
6 Press the or button to select the desired value, and then press the button.
You can select from 5–30 minutes for Mode 1 or 1–6 minutes for Mode 2.
7 To return to the previous screen, press the (Back) button.
To Next Page
Loading...
Need help?
General
