39 Basic Operation
Exiting the Power Saver Mode
The printer automatically exits the Power Saver Mode when it receives a print job from a computer. To
manually exit the Mode 1, press any button on the operator panel. To exit the Mode 2, press the
(Energy Saver) button.
NOTE:
• Opening and closing the rear door will cause the printer to exit the Mode 1.
• When the printer is in the Mode 2, all buttons on the operator panel except for the
(
Energy Saver
) button
do not function. To use the buttons on the operator panel, press the
(
Energy Saver
) button
to exit the
Power Saver Mode.
See also:
• "Setting the PowerSaver Time Option" on page 182
To Next Page
Loading...
