225 Troubleshooting
024-360 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
024-371 Turn off the printer, and then on. Or, unplug the Ethernet cable or USB cable, and then
plug it again. If this does not solve the problem, contact the Fuji Xerox local
representative office or an authorised dealer.
See also:
• "Online Services" on page 267
024-958 Load the correct paper.
See also:
• "Loading Print Media in the Multipurpose Feeder (MPF)" on page 125
• "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 134
024-963
027-446 Change IP address to avoid duplication. Turn off the printer, and turn it on again.
027-452
041-340 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
042-325 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
042-358
042-372
061-370 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
075-100 Check and clear the paper path, load the specified paper, and then press the button.
See also:
• "Clearing Paper Jams From the Front of the Printer" on page 189
075-921 Load paper for the second side (odd) pages, and press the button.
See also:
• "Manual Duplex Printing (Windows Print Driver Only)" on page 140
077-100 Check and clear the paper path.
See also:
• "Clearing Paper Jams From the Back of the Printer" on page 190
077-104
077-106 Check and clear the paper path.
See also:
• "Clearing Paper Jams From the Center Output Tray" on page 192
077-108
077-109
077-304 Close the rear door.
Error-Code What You Can Do