Fuji Xerox DocuPrint M375 z

360
Home > Network > Advanced Network Features > I-Fax Options > Internet Fax (I-Fax) Verification Mail >
Enable Receive Notification for TX Verification Mail
Enable Receive Notification for TX Verification Mail
1. Press [] [Settings] > [All Settings] > [Network] > [E-mail/IFAX] > [Setup Mail RX] >
[Notification].
2. Press one of the three possible settings:
• To send TX Verification Mail, the Sender must configure these settings:
-Switch [Notification] in [Setup Mail TX] to [On].
-Switch [Header] in [Setup Mail RX] to [All] or [Subject+From+To].
• To receive TX Verification Mail, the Receiver must configure these settings:
-Switch [Notification] in [Setup Mail RX] to [On].
3. Press .
Related Information
• Internet Fax (I-Fax) Verification Mail
Related Models: DocuPrint M385 z/DocuPrint M375 z
Option Description
Receive Notification
On
When Receive Notification is On, a template is sent back to the sender to indicate
successful reception and processing of the message.
These templates depend on the operation requested by the sender.
Example:
SUCCESS: Received From <Mail Address>
Receive Notification
MDN
When Receive Notification is MDN, a report to indicate successful reception and processing
is sent back to the sender if the originating station sent a request confirmation to the MDN
(Message Disposition Notification) field.
Receive Notification
Off
When Receive Notification is Off, all forms of receive notification are disabled and no
message is sent back to the sender regardless of the request.