92 Printer Connection and Software Installation
• Using the Peer-to-Peer Feature
With the peer-to-peer feature, you need to specify the shared printer to install a print driver.
For Windows XP, Windows XP 64-bit Edition, Windows Server 2003, and
Windows Server 2003 x64 Edition
1 Click start (Start for Windows Server 2003/Windows Server 2003 x64 Edition) ď‚® Printers and
Faxes.
2 Click Add a printer (Add Printer for Windows Server 2003/Windows Server 2003 x64 Edition)
to launch the Add Printer Wizard.
3 Click Next.
4 Select A network printer, or a printer attached to another computer, and then click Next.
5 Click Browse for a printer, and then click Next.
6 Select the printer, and then click Next. If the printer is not listed, click Back and enter the path to
the printer in the text box.
The server host name is the name of the server computer that identifies it to the network. The
shared printer name is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a print driver. If no system driver is
available, specify the location where the driver is available.
7 Select Yes if you want your printer to be set as the default printer, and then click Next.
8 Click Finish.
For example:\\<server host name>\<shared printer name>
To Next Page
Loading...
Need help?
General
