FujiFilm DRYPIX 4000 Service Manual

DRYPIX 4000 Service Manual
MU-101
MU-101
006-267-02
04.25.2005 FM4589
[PC1-1-3] SubnetMask
<FUNCTION>
Command for setting the subnet mask of the equipment.
{MU:3.3 [1-4-1-2]_SubNetMask}
<REMARKS>
• Input range: 0 to 255
• If no value is entered, it will be unacceptable.
<OPERATIONS>
1.
Enter the subnet mask (decimal).
[PC1-1-4] Default Gateway
<FUNCTION>
Command for setting the default gateway address of the equipment.
{MU:3.3 [1-4-1-3]_Gateway}
<REMARKS>
• Input range: 0 to 255
• Unaccepted: “0.0.0.0”, “255.255.255.255”
• If no value is entered, it will be taken as incomplete setting.
<OPERATIONS>
1.
Enter the default gateway address (decimal).
[PC1-1-5] MacAddress
<FUNCTION>
The MAC address of the MTH board is displayed.
{MU:3.3 [1-4-1-4]_Mac Address}

FujiFilm DRYPIX 4000 Specifications

General

Print Speed	Approximately 130 sheets/hour (14 x 17 inch)
Print Resolution	320 dpi
Resolution	320 dpi
Weight	Approx. 441 lbs. (200 kg)
Power Requirements	AC200-240V ±10% 50/60Hz 10A
Media Size	8x10 inches, 10x12 inches, 11x14 inches, 14x17 inches
Film Sizes	8x10 inches, 10x12 inches, 11x14 inches, 14x17 inches
Input Film Magazines	2
Connectivity	Ethernet
Network Interface	Ethernet 10Base-T/100Base-TX
Gradation	4, 096 levels (12 bits)