Why are FujiFilm Cell Phone Accessories prints white?
To avoid white prints with your FujiFilm Cell Phone Accessory printer, do not open the film door until all the film has been used. Opening the film door prematurely exposes the film, causing the exposed area to appear white on the prints.
General| Color name | Ash White |
|---|---|
| Product color | White |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Built-in display | No |
| Grayscale levels | 256 |
| Market positioning | Home & office |
| Print technology | - |
| Maximum resolution | 318 x 318 DPI |
| Time to first page (color, normal) | 12 s |
| USB port | Yes |
| USB connector | Micro-USB Type-A |
| USB 2.0 ports quantity | 1 |
| Power source | Battery |
| Charging time | 2 h |
| Power consumption (printing) | 3 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 33.7 mm |
|---|---|
| Width | 39 mm |
| Height | 127.5 mm |
| Weight | 340 g |
Explains LED indicators for battery charging status.
Step-by-step guide to insert a new film pack.
Instructions for removing used film.
To Next Page