-4-
When designing the cabinet ensure that:
● The cabinet openings are as Diagram 1.
● There is a supporting panel underneath for the oven to sit on.
● There is adequate space around the appliance for air to circulate.
● The materials, laminates, edging and adhesive used to construct the
cabinet withstand temperature up to 120℃.
● For the most efficient air circulation, the cabinet construction should
incorporate a recessed rear panel (min. 70mm) which allows the hot air to
rise through the space behind the cabinet while drawing fresh air through the
space beneath the oven door.
● There must be no rear panel directly behind the oven itself so that air can
circulate freely. Refer Diagram 2.
Installation Instructions
2
3
m
m
4
5
4
m
m
5
9
7
m
m
4
8
0
m
m
5
4
5
m
m
13mm
457mm
18mm
23mm
Diagram 1
4 5 0 m m
5
6
0
m
m
M
i
n
.
5
5
0
m
m
Mi
n 70mm
To Next Page
Loading...
