Preparing your notebook for use
Switching the notebook on for the first time
When you switch your notebook on for the first time, the supplied software is installed and
configured. Due to the fact that this installation procedure must not be interrupted, you
should set aside enough time for it to be fully completed and connect the notebook to the
mains outlet using the mains adapter.
!
During installation, the notebook must only be rebooted when you are requested to do so!
Your operating system is pre-installed on the hard disk to facilitate the procedure when you use your
notebook for the first time.
► Insert the battery (see "Battery: inserting").
► Switch the notebook on (see "
Working with the notebook", section "Notebook: switching on").
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find additional
information on the system as well as the drivers, help programs, updates, manuals, etc. on
your notebook or on the "Drivers & Utilities" CD/DVD or on our website (see "
Information
sources
").
i
10600803307, edition 1 11
To Next Page
Loading...
Need help?
General
