Removing and installing components during servicing
Removing and installing the battery
i
How to remove and reinstall a battery is described in "Working with the notebook" in the
section "
Removing and installing the battery".
Removing and installing the CD/DVD drive
If you are asked by the Hotline/Help Desk to remove and install the optical drive yourself, proceed as
follows:
CD/DVD drive: removing
► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay an anti-
slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see "
Battery: removing").
► Remove the screw.
► Push a pen or a piece of wire (1) (such as a
paperclip) firmly into the opening.
1
2
The drive tray is ejected (2).
48 10600803307, edition 1
To Next Page
Loading...
Need help?
General
