Working with the notebook
Using the energy saving functions
If you use the available energy saving functions, the notebook uses less energy. You will then be
able to work longer when using the battery before having to recharge it.
This increases the energy efficiency of your system, reducing the effects on the
environment.
If you optimise your use of the power saving options, you can make significant savings
and protect the environment at the same time.
i
When you close the lid, the notebook automatically enters an energy-saving mode. Under Windows,
Hibernate is activated by default.
We recommend you configure the following settings:
These settings are based on practical experience, and may, therefore, differ from the default settings
configured by the software preinstallation routines and those made by Windows.
Function: On external power Battery power:
Switch off monitor: After 10 minutes After 5 minutes
Switch off hard disk(s): After 15 minutes After 10 minutes
Standby: After 20 minutes After 15 minutes
Hibernate: After 1 hour After 30 minutes
► Change the energy savings settings under
Start – (Settings) – Control Panel – Mobile PC – Power
options
.
► Configure the screensaver settings under
Start – (Settings) – Control Panel – Appearance and
Personalization – Personalization – Change screensaver
.
or
► Right click on the desktop. Configure the screensaver under
Personalization – Change
screensave
r.
If you ever need more information on a selection option, you can view the Microsoft help
documents for most settings by pressing the
F1 button.
i
When the notebook is in power-saving mode, the following must be remembered:
Files that are opened when the power-saving mode is enabled are stored in RAM, the
cache or a swapfile on the hard disk.
i
Never switch the notebook off while it is in an energy saving mode. If the installed battery
is almost empty, you should closed all open files and not enable power-saving mode.
Switch the notebook off:
● If you want to connect other external devices
● If you want to disconnect any external devices from the notebook
● If you want to change the memory configuration
10600803307, edition 1 27