EasyManuals Logo
Home>Fujitsu>Scanner>5015C - fi - Sheetfed Scanner

Fujitsu 5015C - fi - Sheetfed Scanner Getting Started

Fujitsu 5015C - fi - Sheetfed Scanner
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
AP-4
Appendix2 DAILY CARE
Do not use aerosol sprays near
the scanner
Cleaning Materials
For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the scan-
ner.
Cleaning Method
The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
Locations and Cycle for Cleaning
For details on the cleaning the ADF, refer to "3.2 clean-
ing the ADF" in fi-5015C Operator’s Guide on the Setup
DVD-ROM".
WARNING
When operating the scanner, the
ADF’s inside glass becomes very
hot.
Before you clean inside the scan-
ner, turn off its power and unplug
the AC adapter from the outlet. Wait
for at least 15 minutes.
WARNING
Do not use any aerosol sprays or
alcohol based sprays to clean the
scanner.
Dust blown up by strong air from
the spray may enter the inside of
the scanner. This may cause the
scanner to fail or malfunction.
Sparks, caused by static electricity,
generated when blowing off dust
and dirt from the outside of the
scanner may cause a fire.
Cleaning
Materials
Parts No. Remarks
Cleaner F1 PA03950-
0352
1 bottle
Moisten a cloth with
this fluid and wipe the
scanner clean.
Cleaning Wipe PA03950-
0419
24 sheets/pack
Pre-moistened with
Cleaner F1, Cleaning
Wipes are used
instead of moistened
cloths.
Lint-free dry
cloth
- Commercially available one
ATTENTION
It may take long before the cleaner
vaporizes if a large quantity is used.
When cleaning the scanner parts,
dampen a cloth with modest quantities
of the cleaner. In addition, wipe off the
cleaner completely with a soft lint-free
cloth to leave no residue on the surface
of the cleaned parts.
Part to clean Standard Cleaning Cycle
Pad ASSY Clean these parts after every
1,000 scans.
Pick roller unit
Pinch roller
Glass
ATTENTION
The scanner must be cleaned more fre-
quently if you scan any of the following
type of sheets:
Documents of coated paper
Documents that are almost completely
covered with printed text or graphics
Chemically treated documents such
as carbonless paper
Documents containing a large amount
of calcium carbonate
Documents written by pencil
Documents with not enough fixed a
toner.

Other manuals for Fujitsu 5015C - fi - Sheetfed Scanner

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu 5015C - fi - Sheetfed Scanner and is the answer not in the manual?

Fujitsu 5015C - fi - Sheetfed Scanner Specifications

General IconGeneral
BrandFujitsu
Model5015C - fi - Sheetfed Scanner
CategoryScanner
LanguageEnglish

Related product manuals