Fujitsu Airstage J-II - Remote Controller Display Troubles

4-2-4 Remote Controller Display
04-06
<< WIRED REMOTE CONTROLLER >>
If an error occurs, the following display will be shown.
(“ “ will appear in the set room temperature display.)
If “
“ is displayed, immediately contact authorized
service personnel.
Unit number (usually 0) Error code
Ex. Error code display
ERROR CODE DISPLAY
<< SIMPLE REMOTE CONTROLLER >>
Error code
Ex. Error code display
Faulty unit No.
(Remote controller address)
ERROR CODE DISPLAY
<< GROUP REMOTE CONTROLLER >>
The air conditioning system must be inspected if “ : “
(error code) appears on the timer and Clock Display, or the
operation lamp is flashing.
Model code
Error code
Ex. Error code display
ERROR CODE DISPLAY
Model code
: Outdoor unit
: Indoor unit
: Group remote controller
: Convertor
*1 ;
*1
If an error occurs, the following display will be shown.
(“ “ will appear in the set room temperature display.)
If “
“ is displayed, immediately contact authorized
service personnel.