First-time setup of the AMILO Mini
Selecting a location
Selec tinga locat ionDeviceMainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and d amage.
• Do not place the device on your legs for a long period of time. The underside
of the device heats up during normal operation. Prolonged contact with the
skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface . Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects a t least 1 00 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingfor operationMainsadapter
Observe the safety precautions in the enclosed "Safety" manual.
The supplied power cable conforms to the requirements of the country in
which y ou purchased your device. Make sure that the p ower cable is approved
for use in the country in which yo u intend to use it.
The mains adapter’s power cable should only be connected to a mains socket
if the device is c onnected to the mains adapter.
Make sure that the rated current of the mains adapter is not higher than
that of the mains sup ply to which yo u connect the mains adapter (se e
chapter "Technical Data""Mains adapter", Page 11).
1
2
3
► Connect the mains ad apter cable (1) to
the D C jack (DC IN) of the device.
► Connect the power cable (2) to the
mains adapter.
► Plug the power cable (3) into a mains outlet.
6 - English 10600986639, edition 1
To Next Page
Loading...
Need help?
General