- 157 -
MULTI TYPE
4 rooms type
13-8. Central remote controller
Switch position
Central remote controller
Dip switch setting
SW1: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
DIP switch 1
SW1 Memory backup setting
SW2 Prohibited
SW3 Prohibited
SW4 Prohibited
SW5 Prohibited
SW6 Prohibited
SW1 Factory setting
Off Invalidity ♦
On Validity
123456
ON
OFF
Front case (back side)
DIP switch
ON