Fujitsu AOU48RLXFZ - Page 131

5. CONTROL SYSTEM
START/STOP button1
Pressed to start and stop operation.
SET TEMP. button2
Selects the setting temperature.
MODE button3
Selects the operating mode ( AUTO , COOL , DRY
,
FAN
, HEAT ).
FAN button4
Selects the fan speed ( AUTO , HIGH
,
MED
,
LOW
, QUIET ).
Vertical air flow direction and swing button5
Press for two seconds to change the swing mode
Horizontal air flow direction and swing button6
Press for two seconds to change the swing mode.
Built-in thermo sensor7
Detect room temperature.
TIMER MODE (CLOCK ADJUST) button8
Selects the timer mode (OFF TIMER, ON TIMER, WEEKLY TIMER)
Set the current time.
DAY (DAY OFF) button9
Temporarily cancels of one day timer.
SET BACK button10
Pressed select the set back timer.
SET TIME button11
Pressed to select the set back timer.
TIMER DELETE button12
The schedule of a weekly timer is deleted.
TIME SET button13
Sets the date, hour, minute and on-off time.
ECONOMY (THERMO SENSOR) button14
FILTER RESET button15
Operation lamp16
Lights during operation and when the timer is on.
Timer and clock display17
Operation mode display18
Fan speed display19
Operation lock display20
Temperature display21
Displayed temperature is set temperature.
Defrost display22
Indicates during the oil recovery and defrosting operation.
Vertical swing display 23
Horizontal swing display 24
Economy display25
Thermo sensor display 26
Filter display27
FUNCTIONS

Display panel
Note: Functions will be different due to type of indoor unit.
For details, please see operation manual.
7
Display
13
12
11
10
2
8
9
16
15
14
1
3
5
4
6
18
17
1920 21
2223 242527 26
- (05 - 14) -
CONTROL SYSTEM CONTROL SYSTEM