Fujitsu AOU48RLXFZ - Program Timer; Sleep Timer; Wireless Remote Controller

5. CONTROL SYSTEM
WIRELESS REMOTE CONTROLLER2-4.
MODEL : UTY - LNHUM / AR-RAH1U

FEATURES

Built-in timers

Select from four different timer programs (On / Off / Program / Sleep).
Program timer

The program timer operates the ON and OFF timer once within a 24 hour period.
Sleep timer

The sleep timer function automatically corrects the temperature thermostat setting according to the
time setting to prevent excessive cooling and heating while sleeping.
60min.
2°F (1°C)
4°F (2°C)
Timer setting
2°F (1°C)
4°F (2°C)
6°F (3°C)
8°F (4°C)
30min.
60min.
90min.
Timer setting
Cooling operation / dry operation
When the sleep timer is set, the set temperature
automatically rises 2°F (1°C) every hour. The set
temperature can rise up to a maximum of 4°F (2°C).
Heating operation
When the sleep timer is set, the set temperature
automatically drops 2°F (1°C) every 30 minutes. The
set temperature can drop to a maximum of 8°F (4°C).
Switching remote controller signal code

AB CD
AB
C
D
Mixed-up
I.U. I.U. I.U. I.U.
I.U. I.U. I.U. I.U.
After code change
Code selector switch eliminates unit
•
being wrongly switched.
(Up to 4 codes can be set.)
*I.U.=Indoor unit
Four kinds of timer setup (ON / OFF / PROGRAM / SLEEP) are ●
possible.
Can be used jointly with wired remote controllers . ●
Easy to change custom code (4 patterns). ●
- (05 - 25) -
CONTROL SYSTEM CONTROL SYSTEM