6. SYSTEM DESIGN
SWITCHING SELECTION OF FUNCTION SETTING MODE
2) To activate the function setting mode, hold down the three buttons of SET TEMP. V, SET
TEMP. Λ and FAN at the same time for 5 seconds or longer.
Function setting mode initial display
BUTTON NAME AND FUNCTION
During address setting mode, indoor unit reject the any operation command from remote ●
controller.
Function number
Refer to FUNCTION DETAILS
Remote controller address
It fixes to 00.
SET TIME “<” and “>” button
Switches the function number.
Setting number
Refer to FUNCTION DETAILS
SET TEMP. “V” and “
Λ
” button
Switches the setting number.
TIMER SET button
Transmits function setting
- (06 - 61) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
