6. SYSTEM DESIGN
Installation of decoration panel
1) Please connect extension wires for use with louvers, or extension wire for optical receiver
after provisional attaching of the decoration panel.
2) Tie the wires together with the fasteners provided and insert into the hole of the Fresh Air
Intake Kit.
3) Install the wire-cover provided on the Fresh Air Intake Kit.
4) Please install decoration panel according to the installation instruction sheet provided.
Metal fittings x 2
Extention wire x 3
Screw x 2
Connect
Binder
- (06 - 125) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
