Fujitsu ARTG45LHTB User Manual

2-2. Setting items in Menu
°
C
26
Mode
Menu
Cool
Monitor
Set temp.
Fan
High
Mo
10:00
Menu
Function
Timer
Submenu
Mo 10:00
Setting:
Back:
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo
10:00
Setting:
Back:
Submenu
[
1/2
]
Following items can be adjusted in Menu.
NOTES:
Functions marked “–” in “Secondary unit”columnof following table cannot be adjustedfrom the remote controller that is•
speciedasthesecondarycontrolunit.Adjustthefunctionontheprimaryunit.
Depending on the type of the indoor unit, some functions cannot be set. •
Settings and Display Items Details
Operation
(See page)
Secondary
unit
Function Economy The room temperature will be little higher than the set-temp under
cooling mode and lower than set-temp under heating mode.
Therefore, the economy mode is able to save more energy than
other normal mode.
12 O
Set temp. (temperature)
auto return
The temperature automatically returns to the preset value after a
certain period of time has elapsed since the set temperature was
changed.
The set time can be set from 30 to 120 minutes in units of 10 min-
utes.
12 –
Set temp. (temperature)
range limitation
Limits the range of the set temperature.
The temperature range can be limited through the operation mode.
13 –
Timer On timer Use this timer function to start air conditioner operation. The timer
operates and air condition operation starts after the set time has
passed. The timer can be set up to 24 hours in advance.
Can be set up to 24 hours in units of 30 minutes.
14 –
Off timer Use this timer function to stop air conditioner operation. The timer
operates and air conditioner operation stops after the set time has
passed. The timer can be set up to 24 hours in advance.
Can be set up to 24 hours in units of 30 minutes.
15 –
Weekly timer Operation start and end times can be set to 1 week.
Up to 8 patterns of On/Off, operation mode, and temperature setting
can be set in 1 day.
2 sets of the weekly timer, [Weekly 1] and [Weekly 2], can be set.
For example, you can assign the [Weekly 1] for summer and [Weekly
2] for winter. Then you only need to switch [Weekly 1] and [Weekly 2]
by the season.
16 –
Auto-off timer Operation end time can be set if the air conditioning operation has
been started with the [On/Off button] of this remote controller.
The set time can be set from 30 to 240 minutes in units of 10 min-
utes.
You can also specify the valid hour in a day for this timer.
22 –
NOTE: If the function you are selecting is restricted by [Management] function, following message is displayed in the operation
guidance display.
XXXXXX
XXXXXX
Restricted by the management function
Back:
En-9
9374379866_OM_EN.indd 9 17/12/2014 13:19:27

Fujitsu ARTG45LHTB Specifications

General

Brand	Fujitsu
Model	ARTG45LHTB
Category	Air Conditioner
Language	English